MPEG2/4 (MPG, MPEG)

From Oxygen.next Wiki

Attention: There is no MPG Codec delivered with Oxygen.next out of the Box. But you can install one yourself!

[edit] General Encoding Settings

Basis of all video encoding settings is the MainConcept MPEG Video Codec. Since LC and plasma displays do not use interlaced scanning a progressive output (without field order), i.e. full screens as well as the usage of square pixels are recommended. In the GOP settings (group of pictures) the M-frames should be set to 3 and the N-frames should be set to 15. In most cases these settings are default. For all MPEG-2 output standards a stereo audio output using the MainConcept MPEG Audio Codec and the MPEG-1 Audio Layer 2 Standard is recommended at a constant bitrate of 192kbps, a sample rate of 192kbps and a sample size of 16 Bit.

[edit] Examples

Progressive Scan (full screens). The Elencard MainConcept MPEG2 codec is applied with an audio setting of 192kbps, 44khz stereo.

[edit] Regular SD-Material

Resolution 720x405 with square pixels (aspect ratio 16:9), 25 frames per second and a data rate of 7000kbit/s.